Application notes, material updates, and technical insights from our engineering team.
Carbon post-processing must preserve dimensions and avoid creating cracks.
Vacuum sealing is one barrier in a complete drying and storage process. Verify the seal and protect the spool.
How to dry wet filament with material-specific temperature and time guidance, plus verification and storage controls.
Long-term filament storage best practices to prevent moisture, ageing and mechanical damage.
Nozzle wear is a measurable process change. Track lifetime and dimensional results.
Corners and walls carry concentrated loads. Validate the real part.
Rough carbon fibre prints come from fibre content, layer height, flow, temperature and nozzle wear. Smoothing starts with process control.
Moisture turns into steam inside the nozzle, creating bubbles and unstable flow in nylon and PETG. Drying and dry storage are the fix.
Uneven extrusion is diagnosed along the whole feed and melt chain.
Elephant foot is a first-layer balance. Fix offset first and verify dimensions after cooling.
Preventing overheating and melting on small 3D printed features through thermal and motion control.
Troubleshooting filament slipping in the extruder gear with a structured mechanical, thermal and pressure diagnosis.